Single molecular multianalyte sensor: jewel pendant ligand

[structure: see text] The jewel pendant ligand has multiple chromogenic units combined in a single molecule with the dyes linked to a semiselective binding site by three heteroatoms (O, N, S) having different HSAB characteristics, to indicate diverse response to individual transition metal ions. Using a single-molecular multianalyte sensor, multiple analytes could be determined with a minimal sensing system.     

Synthesis of polystyenes with different stereoregularities by anionic polymerization

The stereoregularity of polystyrene prepared by anionic polymerization was determined by means of ¹³C-NMR spectroscopy. The stereoregularity changed with such polymerization conditions as catalyst, solvent, and temperature. Sodium naphthalene as catalyst gave a syndiotactic-rich polystyrene of 66–68% syndiotactic dyads independently of solvent and temperature, while potassium and cesium naphthalenes as catalyst produced polystyrenes with different stereoregularities ranging from syndiotactic-rich to isotactic-rich configurations, depending on solvent and temperature. The mechanism of anionic polymerization which caused the difference in stereoregularity was discussed from the viewpoint of growing ionic species.     

Comparison of the glass transition temperature and fragility parameter of isomalto-olygomer predicted by molecular dynamics simulations with those measured by differential scanning calorimetry

The purpose of this study is to examine whether molecular dynamics (MD) simulations using a commercially available software for personal computers can estimate the glass transition temperature (Tg) of amorphous systems containing pharmaceutically-relevant excipients. MD simulations were carried out with an amorphous matrix model constructed from isomaltoheptaose, and the Tg estimated from the calculated density versus temperature profile was compared with the Tg measured by differential scanning calorimetry (DSC) for freeze-dried isomalto-oligomer having an average molecular weight close to that of isomaltoheptaose. The Tg values determined by DSC were lower by 10 to 20 K than those extrapolated from the Tg values estimated by MD simulation. Fragility parameter was estimated to be 56 and 51 from MD simulation and from DSC measurement, respectively. Thus, the results suggest that MD simulation can provide approximate estimates for the Tg and fragility parameter of amorphous formulations. However, a reduction of the cooling rate, achievable by sufficiently elongating the simulation duration, is necessary for more accurate estimation.     

Structural variety of membrane permeable peptides

Peptide-mediated protein delivery into living cells has been attracting our attention. Among the peptides that have been reported to have carrier activity, the one from the human immunodeficient virus (HIV)-1 Tat has been most often used for the introduction of exogenous macromolecules into cells. We have shown that not only the Tat peptide, but also various arginine-rich peptides showed very similar characteristics in translocation, and the possible presence of ubiquitous internalization mechanisms among the arginine-rich peptides has also been suggested. These arginine-rich peptides includes ones derived from HIV-1 Rev and flock house virus coat proteins. The linear- and branched-chain peptides containing approximately 8 residues of arginine also show a similar ability. In this review, we present the structural variety of membrane permeable peptides and provide a survey of the findings on the translocation of these peptides through the cell membranes.     

DNA-bleomycin interaction: Nucleotide sequence-specific binding and cleavage of DNA by bleomycin

Biosynthetic intermediates and synthetic analogues of bleomycin (BLM) have been investigated for their metal binding, dioxygen activation, and DNA cleavage. Molecular O₂ was activated by the Fe(II) complex of a synthetic model ligand. Nucleotide sequence specificities in DNA cleavage by the BLM-Fe(II) and deglyco-BLM-Fe(II) complexes were almost identical. It has been shown that (1) the β-aminoalanine-pyrimidine-β-hydroxyhistidine portion of BLM is essential for the metal binding and dioxygen activation and (2) the bithiazole moiety contributes to the specific binding to guanine base of DNA.     

The counterion releasing effect and the partition coefficient of branched alkanols in ionic micellar solution

In the micellar solution of SDS, the partition coefficient (K_x) of following branched alkanols at infinite dilution was determined by applying a differential conductivity method: the alkanols used were i-C_mH_2m+1OH (m=4-9, i=1-5) in which the position of OH group (i) shifts from an end to the center of a hydrocarbon chain. The method provides two significant quantities, d!/dX_am and dC_sf/dC_af in addition to K_x. The following results have been obtained. (1) The dependence of K_x on i indicates that the hydrophobicity of alkanol is weakened with increasing i, whereas the increase in m strengthens the hydrophobicity. (2) The degree of counterion disossiation of micelles (!) is accelerated by the solubilized alkanols in micelles (mole fraction: X_am) and the acceleration rate, d!/dX_am (=0.17), depends on neither m nor i. (3) In the bulk water, the monomerically dissolved alkanols (concentration: C_af) depresses the concentration of free monomer surfactant (C_sf), and the depressing rate, dC_sf/dC_af, in micellar solution is identical with the corresponding quantity, ((CMC/(C_a)_o at CMC.     

The first example of the stereoselective synthesis of 7 beta-carbamoyl-4,5alpha-epoxymorphinan via a novel and reactive gamma-lactone

7beta-Carbamoyl-4,5alpha-epoxymorphinans 5 were stereoselectively synthesized from the 7alpha-carboxylate intermediate 3 in the presence of 1,8-diazabicyclo[5.4.0]undec-7-ene (DBU) and amines under reflux conditions in mesitylene via a novel and reactive gamma-lactone 7. These were the first examples of the stereoselective syntheses of 7beta-substituted 4,5alpha-epoxymorphinans. The mechanism of the reaction process was elucidated as follows: 1) epimerization of 7alpha-carboxylate 3, 2) intramolecular lactonization of 7beta-carboxylate 6, and 3) aminolysis of the resultant gamma-lactone 7. The aminolysis of the isolated reactive gamma-lactone 7 with allylamine and the alcoholysis with MeOH in the presence of NaBH(4) proceeded at room temperature. The gamma-lactone 7 can be a useful intermediate for the preparation of 7beta-substituted 4,5alpha-epoxymorphinans that would be potent selective delta opioid receptor ligands. The stereoselective syntheses of the 7alpha-carbamoyl-4,5alpha-epoxymorphinans 9 from 7alpha-carboxylate 3 via 7alpha-carboxylic acid were also successful.     

Fabrication of PbTiO3 Ceramic Fibers by Sol-Gel Processing

The sol-gel processing was applied to the fabrication of PbTiO₃ fibers. Pb(CH₃COO)₂·3H₂O and Ti(OC₃H ₇ ⁱ )₄ were refluxed with stirring in 2-methoxyethanol to form Pb-methoxyethoxide and Ti-methoxyethoxide, respectively, followed by mixing with stirring in 2-methoxyethanol to form Pb−Ti double alkoxide. The hydrolysis and polycondensation reaction of this double alkoxide gave polymerized products, and as a result the viscosity of the solution increased, suggesting that linear polymers were produced through the hydrolysis and polycondensation reaction. Homogeneous PbTiO₃ gel fibers were drawn from the spinnable viscous solutions, which were wellcrystallized into perovskite type PbTiO₃ at 650°C. The heat-treated fibers were a few centimeters long and from 10 to 100 μm in diameter. The fiber was made up of extremely uniform grains. Electron diffraction revealed a preferred growth of (101) planes along the fiber axis, which might be due to the linear molecular characteristics of the alkoxide.     

Catalyzed cycloaddition reactions of α-silyloxy-α,β-unsaturated ketone and aldehyde

The reactions of α-silyloxy-ga,β-unsaturated ketone and aldehyde with diene afforded [4+2] and [4+3] cycloadducts respectively in the presence of a catalyst.     

Novel method to control release of lipophilic drugs with high potency from silicone

Silicone has been utilized as a carrier material for sustained release system of lipophilic drugs. Extensive studies revealed that drug release rate is influenced by factors such as physicochemical properties of the drug and additives.(1-5)) When a lipophilic drug is highly potent at low concentrations, the drug release rate should be strictly controlled so as to avoid side effects. In this study, using vitamin D(3) (VD(3)) as an example of such drugs, we investigated novel method to suppress initial burst and to modify drug release rate from silicone matrix. As a result, it was found that (a). addition of human serum albumin (HSA) suppressed initial burst and enhanced release rate in the later stage, resulting constant release of VD(3), (b). covering a matrix formulation with a membrane of low diffusivity (core-rod formulation) suppressed initial burst and released drug in a constant rate, and (3) using materials for which the drug has high affinity as dissolution solvent (reservoir formulation), the drug release rate was reduced.